Starting and Stopping the JPIP Service

You are here: Common Tasks > Starting and Stopping the JPIP Server

Starting and Stopping the JPIP Service

The JPIP service or daemon processes requests for imagery via JPIP. You must restart the JPIP service or daemon any time you change its configuration or add or remove a catalog.

To start or stop the JPIP Server:

Open the Express Server Manager (see Accessing the Express Server Manager).
Click Status on the top navigation bar, then click the Start/Stop button to the right of the JPIP Server status line.

Alternatively, on Linux you can stop the JPIP daemon from the command line.

Open a terminal.
Run one of the following commands with root permissions:
```
/etc/init.d/ltjpipd start
```
OR
```
/etc/init.d/ltjpipd stop
```