Setting JPIP Network Configuration Properties

Configure JPIP network configuration properties to set the port and listening address used by the JPIP server.

To set JPIP network configuration properties, complete the following steps:

1. Open the Express Server Manager (see Accessing the Express Server Manager).
2. Click Settings on the top navigation bar.
3. Select JPIP on the left-hand navigation panel, then click Edit at the bottom of your screen.
4. Enter or edit values for Port and Listening Address, then click Save.
5. If you have no further settings to edit, click Publish.

Remember that clicking Save in the workspace only temporarily saves your changes until you click Publish or Discard. Clicking Publish sends all edits on all the configuration pages to the live Express Server. Clicking Discard overwrites all pages of the workspace with the current live configuration.

Port

By default, Express Server listens for connection requests on port 9013. To override this, you may specify a different port number here.

Listening Address

You should not need to use this property unless you wish to serve images from a multihomed host. By default, the JPIP Server uses the first valid IP address on which the computer is capable of listening. IP addresses should be supplied in the familiar period-separated numeric format.